PCP TACTICAL 24
Compressor 300 Bar - Water-cooled
Compressor 300 Bar - Water-cooled
Couldn't load pickup availability
Compressor - Water-cooled.
2 variants available: With pressure limiter / Without pressure limiter
Differences:
With "pressure limiter": The compressor pumps up to 300 bar pressure and then releases the excess pressure through a safety valve to the outside.
Advantage: The compressor can inflate cylinders of 300 bar or more unsupervised.
Without "pressure limiter": The compressor pumps air until the maximum output pressure of approx. 300-350 bar is reached.
Advantage: Slightly higher maximum pressures are possible for models approved for over 300 bar, such as Huben K1/GK1.
For both models, the compressor continues to run until the power supply is manually switched off.
Attention: Compressor oil "VDL 100" is still required for operation (approx. 0.5L)
Features & Details
- High Pressure: Our 1800W PCP air compressor has a maximum pressure of 4500 PSI and an automatic pressure relief valve (automatically releases pressure when it reaches 32-33 bar), allowing quick inflation of your paintball and PCP rifles.
- Water Cooling: This high-pressure air compressor is equipped with a water cooling system. The cylinder has temperature control. The ideal operating temperature range is between 50 and 70°C. Once the temperature reaches 70°C, the unit automatically switches off. Please refill the cooling water before restarting.
- Various Safety Features: The PCP high-pressure compressor has an automatic pressure relief valve and protective devices on the front and side for safe operation. Attention: Before operating the device, reinsert the oil drain plug using the vent valve, otherwise there is a risk of explosion.
- Cylinder Temperature Control: Our electric air compressor is equipped with temperature control that monitors the cylinder temperature. The stainless steel/aluminum alloy cylinder ensures durability and extends the life of the unit.
- Versatile Application: The high-pressure compressor has a filter system for removing impurities. When filling diving cylinders, it is recommended to use an external air filter at the outlet for cleaner air. Suitable for diving cylinders, PCP air rifles, paintball cylinders, air pistols, paintball rifles, fire-fighting equipment and other high-pressure applications.
- Motor power: 1800 W
- Maximum pressure: 4500 PSI/300 BAR/30 MPa
- Voltage: 220 V / 50 Hz
- Motor material: Copper
- Cooling method: Water cooling
- Filtration: Water/oil separator
- Lubricating oil: 100 viscosity
- Inflation rate: 2800 rpm
- Filling time: 1 l / 12 min.
- Recommended external water tank: 10 litres
- Pressure gauge: Glycerine manometer
- Dimensions: 37 x 18 x 40 cm
- Net weight: 18 kg
- Maximum noise level: 78 dB
- Compression stage: Two-stage
- Cylinder material: Stainless steel
- Housing material: Cast aluminium
- Air flow rate: 8.8–11 GPM (40–50 L/min); 1.5–1.8 CFM
- Air hose connection: 0.3 inch/8 mm quick coupling
- Recommended tank capacity: maximum 1 litre
- Inflation rate: 35 L/min
Scope of delivery:
- 1x Compressor
-
1 x Water pump
-
2 x Water hose
-
1 x Spare parts set + instructions
Product Safety Regulation (GPSR)
Name: PCP TACTICAL 24
Address: Rabenberger Strasse 2, 08359 Breitenbrunn
URL: www.pcptactical24.de
Email: pcptac24@outlook.de
Importer/EU Responsible:
Name: PCP TACTICAL 24
Address: Rabenberger Strasse 2, 08359 Breitenbrunn
Email: pcptac24@outlook.de
Share
